Factory Workers Vacancies, Qatar Jobs, Planning Engineer Jobs

1. Jobs Title: Material Inspector/Goods Inward (Mechanical)
Vacancies: 5
Location: Qatar
Principal/Project: Edge Water Technical Services
Qualifications:
Male
25 years old and above
Licensed Mechanical Engineer
Six years of working experience in QA/ QC & Inspection environment
Three years’ experience with Oil & Gas Companies
Two years should be relevant to Materials Inspection/ Third Party Inspection
Knowledge of General Engineering Practices / Standards
Well-versed and thorough knowledge in relevant international standards API, ASME, ISA, NEMA, IEEE, IEC, NFPA, BASEEFA, ATEX, ANSI, ASTM, TEMA, BS and related codes & statutory regulations
Extensive working exposure in company specification, codes & standards and statutory regulations
Good command of certification requirements for various materials, equipment
Capable of interpreting technical drawings
Computer literate with knowledge of appropriate ERP software (SAP/MAXIMO) and MS office
Good in problem solving skills, technical communication and interpersonal skills
Good technical reports
Good communication skills in English both oral & written.
Duties/Responsibilities:
To inspect the materials to the PO requirements and verify the physical condition
To check the package condition and record any damages to the package including e-pictures as evidence and upload in SAP.
To obtain required specifications, codes, standards or other Engineering Documents required carrying out the Inspection
To go through the PO certification terms, Item description requirements and
Understand the requirements completely. To obtain the required supporting documents (Drawings / Data Sheets etc.,) from materials attachments in SAP/other available resources
Mark the item number on the item and segregate item wise.
Report item wise visual, dimensional, quantities in the Inspection report with clear status identified.
Any discrepancy from the PO requirements shall be highlighted in the report and advice for CNR.
Discrepant materials shall be taken e-pictures (where necessary) and e-pictures shall be attached in SAP.
Quantities written on the reports shall be accurate inclusive of Units of
Measurements:
After completion of Inspection, the packages shall be affixed with INSPECTION STICKERS clearly indicating the status.
To ensure all Inspection completed packages shall be moved to INSPECTION
Completed area and separate based on Accepted / CNR.
To scan the Inspection Documents and upload in ECM
To follow up on Certification CNR on a weekly basis until closure
Weekly report to be maintained
For CNRs clearance, to review the additional documentation received from suppliers
& Re-Check the materials with the documents provided and clearly identify the status of acceptance and closure of the complaint
Follow up with designated department on approval / endorsement of proof load test certificates.
To release the accepted material from QI where required.
When there is a query / rejection from warehouse or end users, concerned Materials Engineer (Inspection) who inspected the materials is responsible to clarify and to address the issue and resolve.
Carry out Preservation Inspection and old stock material Inspection.
Responsible for housekeeping of Inspection area with regard to company HSE regulations

United Global Manpower Resources, Inc.
2nd/F 2110 F&C Bldg. Sen. Gil Puyat Avenue cor. P. Burgos Street
Pasay City, Metro Manila
Tel No.: (02) 834-7932 / (02) 834-7248 / (02) 238-5818
POEA License No: 041-LB-022312-TP
Website: http://www.unitedglobal.com.ph/
Email Address: recruitment@unitedglobal.com.ph

2. Jobs Title: Factory Workers /Printing Industry
Vacancies: 20
Location: Ajman, United Arab Emirates
Principal/Project: Walford Tobacco Co
Qualifications:
Male
25 years old and above
Vocational Diploma/Short Course Certificate
Two years of working experience to this related field
Computer literate
Duties/Responsibilities:
Set up and operate production machinery according to specific standards and protocols of the company
Ascertain that each machine is properly calibrated at the beginning of each shift so that it provides optimum output
Look through work orders to determine type and quantity of materials needed for each production batch
Measure and grade batches of raw materials and feed them into production machinery
Assemble goods on conveyor belts and report any faults to the supervisor on an immediate basis
Monitor processes to ensure that they are run properly and ensure that basic quality control and quality assurance tests are performed
Store goods and raw materials in factory storage areas and warehouses in manners conducive to ensuring their freshness and safety
Load and unload products to and from delivery vehicles by ensuring their safety
Prepare cartons and crates for packaging purposes and ensure that items are properly and safely packed into them
Drive, operate and maintain proper functioning of property vehicles such as fork lifts and scissor-lift trucks
Inspect finished products to ensure that they conform to quality standards and isolate any non-conformed or damaged items
Communicate problems with machinery and raw and end products to the supervisor
Perform preventative and regular maintenance on machineries to ensure that their operational life is extended
Note: Interested applicants may send their updated resume/documents to: recruitment@unitedglobal.com.ph

United Global Manpower Resources, Inc.
2nd/F 2110 F&C Bldg. Sen. Gil Puyat Avenue cor. P. Burgos Street
Pasay City, Metro Manila
Tel No.: (02) 834-7932 / (02) 834-7248 / (02) 238-5818
POEA License No: 041-LB-022312-TP
Website: http://www.unitedglobal.com.ph/
Email Address: recruitment@unitedglobal.com.ph

3. Jobs Title: Senior Die Designers (Aluminum Extrusion Dies)
Vacancies: 10
Location: Dubai, United Arab Emirates
Principal/Project: Phoenix Middle East
Qualifications:
Male
35 years old and above
Vocational Diploma / Short Course Certificate
Ten years working experience in design of Aluminum Extrusion Dies
Well conversant with the calculations and general norms for the design of Port Hole and Flat dies.
To be able to work independently or with minimum guidance
Good working knowledge of CAD soft wares like AutoCAD/Hyper cad
Good understanding of die manufacturing process.
Proper knowledge of Extrusion process, Extrusion Press features, Die stack and back up tooling.
Note: Interested applicants may send their updated resume/documents to: recruitment@unitedglobal.com.ph

United Global Manpower Resources, Inc.
2nd/F 2110 F&C Bldg. Sen. Gil Puyat Avenue cor. P. Burgos Street
Pasay City, Metro Manila
Tel No.: (02) 834-7932 / (02) 834-7248 / (02) 238-5818
POEA License No: 041-LB-022312-TP
Website: http://www.unitedglobal.com.ph/
Email Address: recruitment@unitedglobal.com.ph
.
4. Jobs Title: Boat/Yacht Repairer
Vacancies: 5
Location: Doha, Qatar
Principal/Project: Jeezan Transport Trading, Co.
Qualifications:
Male
25 years old and above
Vocational Diploma / Short Course Certificate
Five years of working experience to related field
Duties/Responsibilities:
Repairs wooden and fiberglass boats according to blueprints and customer specifications, using hand tools and power tools:
Confers with customer or supervisory personnel and reads blueprints to determine repairs needed and plan sequence of operations.
Examines boat to determine location and extent of defect
Cuts out defective area, using power saw, drills, and hand tools.
Measures and records dimensions of defective area and lays out dimension lines and reference points on materials, using rules, straightedge, squares, and scribing instruments.
Sets up and operates saws, joiners, planers, and shapers to fabricate repair parts.
Positions and fits repair part in boat and secures part to boat, using caulking gun, adhesive, or carpenter’s hand tools.
Cuts fiberglass material to specified size and patches defective surfaces.
Smooth’s repaired surfaces, using power sander.
Installs fittings and equipment according to customer specifications, using hand tools and portable power tools
Hand brushes or sprays paint or other finishing solution on repaired areas and waxes and buffs area to specified finish.
Note: Interested applicants may send their updated resume/documents to: recruitment@unitedglobal.com.ph

United Global Manpower Resources, Inc.
2nd/F 2110 F&C Bldg. Sen. Gil Puyat Avenue cor. P. Burgos Street
Pasay City, Metro Manila
Tel No.: (02) 834-7932 / (02) 834-7248 / (02) 238-5818
POEA License No: 041-LB-022312-TP
Website: http://www.unitedglobal.com.ph/
Email Address: recruitment@unitedglobal.com.ph

5. Jobs Title: Planning Engineer
Vacancies: 5
Location: Doha, Qatar
Principal/Project: Hyundai Engineering & Construction, Ltd.
Qualifications:
Male
25 years old and above
Licensed Engineer
Five years of working experience to related field

Omanfil International Manpower Development Corporation
2nd Floor Rodeo Bldg.,
802 Km. 18 West Service Road
South Super Highway, Paranaque City
Manila, Philippines
Tel No.: 8211650 TO 55
POEA License No: 093-LB-072910-PA
Email Address: manpower@omanfil.com
Website: http://www.omanfil.com/

6. Jobs Title: Auto CAD/Draftsman (HVAC & MEP)
Vacancies: 5
Location: Doha, Qatar
Principal/Project: Imco, Qatar
Qualifications:
25 years old and above
Vocational Diploma / Short Course Certificate
Two years of working experience to related field
Requirements:
Updated resume
Valid Passport
COE/Available Credentials
2×2 pictures (white background)
TOR
High School/Vocational/College Diploma
Note: Interested applicants may send their updated resume/documents to: cvs.starworld@gmail.com

Star World International Manpower & Placement Agency
G/F- 4/F Orina Bldg.
203 J.P. Rizal St. Brgy. Tejeros
Makati City, Manila, Philippines
Tel No.: 4038070 / 4038071/ 861-0886
POEA License No: 243-LB-120911-R
Email Address: cvs.starworld@gmail.com

7. Jobs Title: Beauty Advisor
Vacancies: 10
Location: Doha, Qatar
Principal/Project: Abuissa Holdings
Qualifications:
Female
21 years old and above
Vocational Diploma / Short Course Certificate
Two years of working experience to related field
Must have experience handling (luxury brands like-MAC, Marc Jacobs, Chanel, Christian Dior, Clinique, Murad, Estee Lauder, Shiseido, Clarins).
Note: Interested applicants please apply personally to our office.

JM International, Inc.
4803 Sampaguita Street
Marimar Village, South Super Highway
Paranaque City, Manila
Tel No.: 8230609-10
POEA License No: 091-LB-032816-R

8. Jobs Title: Sales Staff
Vacancies: 10
Location: United Arab Emirates
Principal/Project: Grand Hypermarket
Qualifications:
Female
22 years old and above
Vocational Diploma / Short Course Certificate
Two years of working experience to related field
Have knowledge in sales like electronics, garments, and children’s wear
Note: Interested applicants please apply personally to our office

Androme Recruitment & Management Services, Inc.
Penthouse Unit B-12 Floor
FEMS Tower 1 Bldg.
1289 Zobel, Roxas Avenue
Malate, Manila, Philippines
Tel No.: 2547880/2540626
POEA License No: 228-LB-112310-R
Website: http://andromerecruitment.com/about-us/

9. Jobs Title: Beautician
Vacancies: 10
Location: Dubai, United Arab Emirates
Principal/Project: UAE
Qualifications:
Female
23 years old and above
Vocational Diploma / Short Course Certificate
Two years of working experience to related field
Note: Interested applicants please apply personally to our office

Speed Deployment Manpower Resources
Unit 403 Avenue Square Garden Building
United Nation Ave. & J. Bocobo
Ermita, Manila
Tel No.: 09062 644138
POEA License No: -192-LB-111714-R

10. Jobs Title: Telecom Technician/UFB
Vacancies: 20
Location: Auckland, New Zealand
Principal/Project: Telecommunication Company
Proposed Salary: NZD 3500.00
Qualifications:
Male
22 years old and above
Vocational Diploma / Short Course Certificate
Two years of working experience to related field
Note: Interested applicants please send your documents to our office.

A-MAX Philippines International Promotion, Inc.
5th Floor CFI Coop Bldg. Capitol Compound
Escario Street, Cebu City
Tel No.: 09081755292/09233521402/09164479265
POEA License No: -116-LB-070715-R

You may also like...